激励 1.(激发鼓励) encourage; impel; urge; inspire; excite; stimulate; put one on one's mettle 激励斗志 inspire one's fighting will; 激励士气 give a boost to the morale of the army; 激励某人进一步努力 inspire sb. to further efforts; 新老干部相互学习, 相互激励。 old and young cadres learn from each other and encourage each other. 他需要别人激励一番。 he wants rousing.2.[电子学] drive; excitation; energize 激励器 driver; exciter; 激励器 [电 子] exciter; exciter unit; driver; stimulator; actuator; 激励线圈 excitation coil; drive coil; 激励信号 pumping signal; drive signal
Analysis of the mechanical response of human left ventricls subjected to the active force 心电激励下的人体左心室力学响应分析
Characteristic parameter measurement and identification of geophone by electric sine sweeping exciting 正弦扫频电激励法测量与识别地震检波器特性参数
The governing equations were derived for laminated plates incorporating shear - mode piezoelectric actuators from hamilton ' s principle 采用哈密顿原理导出带剪切型压电激励器的层合板的控制方程。
The optimal parameters for a cantilever piezolaminated beam are analytically obtained to ensure the free end displacement to remain zero 与有限元结果比较表明:本文的理论模型能够模拟压电激励的小曲率圆形曲梁的静态响应。
The shear actuation mechanism of piezoelectric materials was researched in this paper and three - order shear deformation theory was used to model smart laminated plates with shear mode piezoelectric actuators 本文对于压电材料的剪切作动机制进行研究,应用三阶剪切变形理论建立带剪切型压电激励器的智能层合板模型。
Researches in this thesis aim to develop active health monitoring technology and use a diagnostic technique based on a built - in network of piezoelectric actuators and sensors was proposed for detecting the location and size of an damage in isotropic - plates 本文研究的目的在于开发一个主动的健康监测系统,用压电激励器和传感器的嵌入网络诊断技术,来检测各向同性板中损伤的位置和尺寸。
The experiment apparatus has been developed , which is based on software ( labview ) and hardware ( pci board ni 6024e ) . the displacements and generative force at the tip of the ipmc actuators were measured with respect to the different voltages , frequents and various waveforms which include square , sinusoidal , and triangular wave 实验选取了不同电压幅值,不同频率的方波、三角波、正弦波三种波形作为电激励信号,利用高速摄像记录ipmc的位移变形,并通过力传感器实测了ipmc试样末端的输出力。