For saving driver ics ' power consumption and cost , this research proposes a novel display pixel design with integrated charge pump circuits . the proposed display pixel design can supply driving voltage more than double the input voltage to display pixels . there are two advantages for this developed novel pixel design . first , the power consumption of the panels with the proposed novel pixels can be reduced due to the lower voltage on data lines . second , the high voltage driver ics are not necessary , such that the cost and power consumption of the corresponding driving systems can be diminished . from the simulation results , the pixel voltage indeed could raise to more than double input voltage by this proposed design . in addition , the pixels with charge pump circuits also retrench about half power consumption than the conventional display pixels 为了节省面板电路驱动芯片的功率损耗以及制作成本,本研究提出一种新的像素电路设计,而在设计中将会融合电荷泵电路.利用这种电路设计的像素可有效地将像素电极上的驱动电压提高到输入电压的2 3倍以上.此像素电路设计具有两个优势:第一,可以有效降低显示面板的像素功率损耗;第二,不需高电压的面板电路驱动芯片,因此可节省芯片的成本及功率损耗.由模拟结果可知,像素电极上的驱动电压确实可由此像素电路设计而提高到输入电压的2 3倍以上;而像素的功率损耗也可有效地降低,约为传统像素的1 / 2
I have studied the designing technique of the interface circuit in the course of designing entirely , have put forward the interface model with the processor and system controller of the base in wireless communication ; design data line up with data interface , line up module propose horizontal input , vertical algorithm that output in data 笔者在整个设计过程中,研究了接口电路的设计技术,提出了无线通信中基带处理器与系统控制器的接口模型;设计了数据排队与数据接口,在数据排队模块提出了横向输入、纵向输出的算法。